UNIDENTIFIED

IDE PLUS

  Data bus:                  16-bit ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  34-pin cable connector - floppy drive          J1

  40-pin IDE(AT) connector                       J2

  10-pin serial port 2 - internal                J3

  9-pin serial port 1 - external                 J4

  25-pin parallel port - external                J5

  4-pin connector - drive active LED             J6

                        USER CONFIGURABLE SETTINGS

                Function                    Location          Setting

  »   Floppy drive interface address          J9/A           pins 1 & 2
      primary                                                 closed

      Floppy drive interface address          J9/A           pins 2 & 3
      secondary                                               closed

  »   IDE(AT) interface address               J9/B           pins 1 & 2
      primary                                                 closed

      IDE(AT) interface address               J9/B           pins 2 & 3
      secondary                                               closed

  »   Parallel port interrupt select          J9/C           pins 1 & 2
      IRQ7                                                    closed

      Parallel port interrupt select          J9/C           pins 2 & 3
      IRQ5                                                    closed

  »   IDE(AT) interface interrupt             J9/D           pins 1 & 2
      IRQ14                                                   closed

      IDE(AT) interface interrupt             J9/D           pins 2 & 3
      IRQ15                                                   closed

                   USER CONFIGURABLE SETTINGS(CONTINUED)

                Function                    Location          Setting

  »   Serial port 1 interrupt select          J9/E           pins 1 & 2
      IRQ4                                                    closed

      Serial port 1 interrupt select          J9/E           pins 2 & 3
      IRQ7                                                    closed

  »   Serial port 2 interrupt select          J9/F           pins 1 & 2
      IRQ3                                                    closed

      Serial port 2 interrupt select          J9/F           pins 2 & 3
      IRQ5                                                    closed

  »   Serial port 1 enabled                   J7/A           pins 1 & 2
                                                              closed

      Serial port 1 disabled                  J7/A           pins 2 & 3
                                                              closed

  »   Serial port 2 enabled                   J7/B           pins 1 & 2
                                                              closed

      Serial port 2 disabled                  J7/B           pins 2 & 3
                                                              closed

  »   Serial port 1 address COM1              J7/C           pins 1 & 2
                                                              closed

      Serial port 1 address COM3              J7/C           pins 2 & 3
                                                              closed

  »   Serial port 2 address COM2              J7/D           pins 1 & 2
                                                              closed

      Serial port 2 address COM4              J7/D           pins 2 & 3
                                                              closed

  »   Parallel port enabled                   J7/E           pins 1 & 2
                                                              closed

      Parallel port disabled                  J7/E           pins 2 & 3
                                                              closed

  »   IDE(AT) interface enabled               J7/F           pins 1 & 2
                                                              closed

      IDE(AT) interface disabled              J7/F           pins 2 & 3
                                                              closed

  »   Parallel port address 378h              J7/G           pins 1 & 2
      select                                                  closed

      Parallel port address 278h              J7/G           pins 2 & 3
      select                                                  closed

  »   Floppy drive interface enabled          J7/H           pins 1 & 2
                                                              closed

      Floppy drive interface disabled         J7/H           pins 2 & 3
                                                              closed